You’ve reached the right place if you have ever tried to search potential triggers and activities for the error code F21 on your Maytag washer.
- About The Error Codes:
Error codes make it easier for you to know what is wrong with a system. Based on the error code, we could tell you that a piece of hardware, such as the motor or pump, does not work as expected. Some error codes may also mean it is not correctly plugged in.
In this scenario, error code F21 reveals an issue with your Maytag washing machine’s drain valve. If a Maytag washing machine requires eight or more minutes to drain, your system will notify your pipes to close, and you will be needed to repair.
- Common Issues for Error Code F21:
Unfortunately, for various reasons, the F21 error can be one of the most challenging codes. First of all, the washing machine will stop mid-cycle, and if you cannot fix the error, you will have soaked dirty wet clothing which must be washed up as soon as possible. To make it even worse, the door on the front of your washer stays locked so that you cannot remove your clothes until the problem has been resolved. Finally, because it’s an error meaning that it’s having trouble draining, water won’t drain out; you could end up flooding your laundry floor even though you’ve succeeded to get the door open.
- In the midst of the cycle, the washer fails.
- The door remains closed.
- The water would not drain out of the washer.
- Identifying the Issue and Potential Solutions:
The problem should be extremely easy to find in the best cases of fixing an F21 error. You can start testing your dryer by removing it from the wall. Unplug the system before you start, for safety purposes. You should look closely at the drainpipe on the back. If the drainpipe is kinked or blocked, an error code can be issued. You should try to shake it gently or straighten up to see how it works before. Another common symptom is that a high-efficiency detergent is not followed, which cause suds to obstruct the drain can hose.
Then plug in your washer and try to rerun it. If the problem continues and you can detect the washer pump’s gentle whirling, the water pump could be an issue rather than the whole system. Unplug your washing machine and check the device fittings and the electrical systems. If all works well, you should connect your machine and trigger it again without any difficulties. Re-select your loop and press start when it is done, and the power is now on. If the F21 error occurs again after you check your water pump and drain tube, you can contact a professional to repair and maintain Maytag washing machines. In case it doesn’t work, you can need to plan the cost of the new pump or hoses.