Magic Chef Washer Error Code E10: Causes & Fixes

Magic Chef top-load washers are reliable appliances for household laundry needs. However, like any appliance, they can occasionally encounter issues. One common problem is the E10 error code, which can disrupt your washing routine. If you’ve encountered this error, you’re in the right place. This article will explain what the E10 error code means, its causes, and how to fix it.

What Does Magic Chef Washer Error Code E10 Mean?

The E10 error code on a Magic Chef top-load washer usually indicates a water supply issue. Specifically, it points to a problem where the washer is not filling with water within a specified amount of time.

Common Causes of Error Code E10

1. Water Supply Issues:
   • The water supply valves are not fully open.
   • Low water pressure or interruptions in water supply.
2. Clogged Inlet Filters:
   • Filters located at the inlet valves can get clogged with debris, restricting water flow.
3. Kinked or Damaged Inlet Hoses:
   • Hoses that are twisted, bent, or damaged can prevent proper water flow.
4. Faulty Water Inlet Valve:
   • A malfunctioning valve may fail to open, causing water to not enter the washer.
5. Control Board Issues:
   • Rarely, the control board could be at fault, sending incorrect signals to the water inlet system.

How to Fix Magic Chef Washer Error Code E10?

1. Check Water Supply:
   • Ensure that the water supply valves are fully open.
   • Make sure your home’s water pressure is sufficient.
2. Inspect Inlet Filters:
   • Turn off the water supply, disconnect the hoses, and clean the filters to remove debris.
3. Check Inlet Hoses:
   • Straighten or replace kinked or damaged hoses as necessary.
4. Test the Water Inlet Valve:
   • If the valve is not working properly, consider replacing it. You can test it using a multimeter for continuity.
5. Reset the Washer:
   • Unplug the washer for 5–10 minutes, then plug it back in and try a new cycle.
6. Contact a Professional:
   • If the problem persists, it’s best to call a qualified technician for assistance.

Preventing Error Code E10

• Regularly clean the inlet filters to prevent clogs.
• Periodically inspect hoses for signs of damage.
• Ensure that water supply valves are kept open when using the washer.

Conclusion

The E10 error code on your Magic Chef top-load washer is commonly related to water supply issues. By following the troubleshooting steps above, you can often fix the issue yourself. However, if the problem continues, it’s wise to consult a professional appliance repair service. For top-quality repair services, visit Amar Appliance.