Kenmore Oven F10 Error Code – Causes & How to Fix It
If your Kenmore oven is displaying the F10 error code, it means the appliance is detecting high temperatures beyond the normal range. This issue typically occurs due to a faulty temperature sensor, a stuck relay on the control board, or a malfunctioning electronic oven control (EOC). If left unresolved, it can lead to overheating and potential safety hazards.
In this guide, we’ll explore the common causes of the F10 error code and provide step-by-step solutions to help you fix the problem.
What Causes the Kenmore Oven F10 Error Code?
The F10 error is triggered when the oven’s internal temperature rises uncontrollably. Common causes include:
✔ Faulty Temperature Sensor (RTD Probe) – If the sensor is malfunctioning, it may send incorrect temperature readings to the control board.
✔ Stuck Relay on the Control Board – If the relay controlling the oven’s heat is stuck in the “on” position, the oven may continue heating beyond the set temperature.
✔ Electronic Oven Control (EOC) Failure – A damaged control board may be unable to regulate the oven’s temperature.
✔ Wiring Issues – Loose or damaged wiring between the temperature sensor and control board can cause false readings.
How to Fix the Kenmore Oven F10 Error Code?
Follow these troubleshooting steps to resolve the F10 error code and restore proper oven function.
Step 1: Reset the Oven
🔹 Turn off the oven and unplug it from the power source.
🔹 Wait 5–10 minutes to allow the control board to reset.
🔹 Plug the oven back in and see if the error code clears.
✅ If the error persists, proceed to the next steps.
Step 2: Check the Temperature Sensor (RTD Probe)
🔹 The temperature sensor monitors the oven’s internal heat. If faulty, it can cause overheating.
🔹 Locate the temperature sensor inside the oven (usually on the back wall).
🔹 Use a multimeter to check the sensor’s resistance. It should read around 1080 ohms at room temperature.
🔹 If the reading is off, replace the sensor.
Step 3: Inspect the Control Board & Relay
🔹 A stuck relay on the electronic control board (EOC) may keep the heating element running continuously.
🔹 If the oven overheats even after resetting, the control board may need repair or replacement.
Step 4: Examine the Wiring Connections
🔹 Turn off the power and remove the oven’s back panel.
🔹 Check for loose or damaged wires connecting the temperature sensor to the control board.
🔹 Secure any loose connections or replace frayed wires.
Step 5: Replace the Electronic Control Board (EOC) If Necessary
🔹 If all else fails and the oven continues overheating, the control board is likely faulty.
🔹 Replacing the control board should resolve the issue.
When to Call a Professional for Help
If the F10 error code persists despite trying these fixes, it may be time to call a professional technician. A faulty temperature sensor, wiring issue, or defective control board requires expert diagnosis and repair.
🔧 Need Reliable Kenmore Oven Repair?
At Amar Appliance Repair, we specialize in Kenmore oven repairs across Canada. Our skilled technicians can diagnose and fix your oven’s F10 error code quickly and efficiently.
📞 Contact us today at Amar Appliance Repair for expert appliance repair services!