How to Reset the Samsung Dishwasher LC Error Code?

If you own a Samsung dishwasher, you might occasionally encounter error codes that indicate a problem with the appliance. One such error is the LC error code, which stands for “Leakage Current.” This error typically signifies that the dishwasher has detected water leakage or issues with the water sensor. Fortunately, resetting the dishwasher can often resolve the issue. Here’s a step-by-step guide on how to reset the Samsung dishwasher LC error code.

Step 1: Safety First

Before attempting any reset or troubleshooting, ensure your safety:

• Unplug the Dishwasher: Disconnect it from the power source to prevent any electrical hazards.
• Turn Off Water Supply: If possible, shut off the water supply to avoid any further leakage.

Step 2: Check for Visible Leaks

Inspect the area around your dishwasher for any signs of water leakage. Check the door seals, hoses, and the floor under the appliance. If you find any leaks, fix them before proceeding.

Step 3: Reset the Dishwasher

To reset the dishwasher and potentially clear the LC error code, follow these steps:

1. Wait for a Few Minutes: Leave the dishwasher unplugged for about 5 to 10 minutes. This allows the internal systems to reset.
2. Plug It Back In: After the waiting period, plug the dishwasher back into the power source.
3. Press and Hold the Start Button: On some models, you can reset the dishwasher by pressing and holding the Start/Cancel button for about 3 to 5 seconds. This will clear any error codes that are currently displayed.
4. Check the Control Panel: Once you release the button, the control panel should reset. If the LC error code disappears, your dishwasher is likely functioning correctly.

Step 4: Run a Test Cycle

To ensure everything is working properly, run a short cycle:

1. Select a Normal Wash Cycle: Choose a regular or short wash cycle to test the appliance.
2. Monitor for Issues: Keep an eye on the dishwasher for any unusual noises or leaks during the cycle. If the LC error code reappears, there may be an underlying issue that requires further inspection.

Step 5: Consult the Manual

If the error code persists after resetting, refer to your Samsung dishwasher manual for troubleshooting specific to your model. Different models may have unique error codes and reset procedures.

Step 6: Contact Customer Support

If you have followed all the steps and the LC error code continues to appear, it’s time to seek professional help. Contact Samsung customer support or a certified appliance repair technician to diagnose and fix the issue.

Conclusion

Encountering an LC error code on your Samsung dishwasher can be frustrating, but a reset may resolve the problem. By following the steps outlined in this guide, you can safely reset your appliance and troubleshoot any potential issues. Remember, if the error persists, don’t hesitate to reach out for professional assistance to keep your dishwasher running smoothly.