GE Washer Error Code 26 – Possible Causes & How To Fix
If you own a GE washer, encountering an error code can be frustrating, especially when it disrupts your laundry routine. One common issue is Error Code 26, which may appear suddenly on your machine’s display. In this guide, we’ll explore the possible causes of Error Code 26 and how you can troubleshoot and fix the problem to get your washer back in working order.
What Does GE Washer Error Code 26 Mean?
GE washers are designed to alert users when something goes wrong, and Error Code 26 specifically relates to a motor issue. This error is triggered when the motor experiences a malfunction or is unable to operate properly. Understanding the root cause will help in resolving the issue quickly.
Possible Causes of GE Washer Error Code 26
- Overloaded Washer
- If your washer is overloaded with too many clothes, it may put excess strain on the motor, causing it to shut down and trigger Error Code 26. Make sure to check the capacity limits of your washer and avoid overfilling the drum.
- Obstruction in the Drum
- An obstruction such as a piece of clothing stuck between the drum and the agitator could prevent the motor from functioning correctly. This can also lead to Error Code 26.
- Loose or Damaged Wiring
- Loose or frayed wiring connections between the control board and motor can cause communication issues, resulting in the error. Wiring damage may occur due to vibrations or wear over time.
- Faulty Motor
- A defective motor can be the primary cause of the error. Motors may fail due to overheating, excessive use, or mechanical wear and tear over time.
- Control Board Malfunction
- If the control board, which manages the washer’s operations, is faulty, it can misinterpret the motor’s status and throw Error Code 26. While this is less common, it is still a possibility worth considering.
- Motor Sensor Issues
- The washer’s motor sensor monitors motor functions. If this sensor is faulty or sending incorrect readings, it may cause the error to display.
How to Fix GE Washer Error Code 26?
Now that you understand the possible causes, let’s look at the steps you can take to troubleshoot and fix this issue.
1. Reset the Washer
- The first and easiest step is to try resetting the washer. Unplug the machine from the power source for about 1-2 minutes, then plug it back in and restart it. This can sometimes clear temporary glitches causing the error.
2. Check for Overloading
- Open the washer and remove some of the clothes if you believe the drum is overloaded. Overfilling can strain the motor and trigger the error. Redistribute the load evenly and run the washer again.
3. Inspect for Obstructions
- Carefully inspect the washer drum and the agitator to ensure no clothing or objects are stuck. Remove any obstructions and try to rerun the cycle.
4. Examine Wiring Connections
- Disconnect the washer from the power and inspect the wiring connected to the motor and control board. Look for loose, frayed, or damaged wires. If you find any, you may need to tighten or replace them. If you’re not comfortable doing this yourself, consider contacting a professional technician.
5. Test the Motor
- If none of the above steps work, the motor itself could be faulty. This requires a more technical inspection, and you might need to replace the motor if it’s defective. A professional repair service can test the motor for you to determine if this is the root cause.
6. Replace the Control Board
- If the motor seems fine but the issue persists, it could be the control board malfunctioning. Replacing the control board is a more complex repair that usually requires expert assistance.
When to Call a Professional?
While some of the troubleshooting steps can be done on your own, there are situations where professional help is necessary. If you’re unable to identify the issue after trying these steps, or if the motor or control board needs replacement, it’s best to consult with a certified appliance repair technician. They can quickly diagnose and fix the issue, ensuring that your washer is back in working condition without causing further damage.
Conclusion
GE Washer Error Code 26 can be frustrating, but it’s often caused by common issues like overloading or minor obstructions. By following the troubleshooting steps above, you can usually fix the problem yourself. However, if the motor or control board is at fault, a professional repair might be required.
Always remember to check your washer’s manual and follow the manufacturer’s guidelines for troubleshooting and maintenance to keep your machine running smoothly.