Maytag Washing Machine Troubleshooting & Repair
This guide is by Amar Appliance Repair — a local, owner-run washer repair company in Surrey, BC. If you would rather have a technician handle it: 604-765-4330, seven days a week.
Over time, Maytag washing machine need to be serviced. With a few simple troubleshooting techniques, common difficulties like draining or spinning problems can be swiftly fixed. Maytag drain parts might need to be replaced if the issue is more severe, like a drain leak, for instance. To assist you in resolving these occasionally model-specific issues, have your Maytag washer user manual handy.
We have shared a few concerns and how to trouble shoot them:
Not Spinning or Draining
- Evaluate the load. The water fill might be affected by packing your laundry with too many (or not enough) items.
- Check to see if the washer is plugged into the outlet. If necessary, reset your circuit breaker.
- The drain pipe should be free of kinks. If required, clear the drain on the utility tub.
- To increase the pressure on the lid switch, tightly close the washer’s lid. When the lid is open, the lid switch disables the washer from working. If the switch is closed but not functioning, it can be broken.
- Make contact with a licensed service provider if you are experiencing the same problem with your Maytag Washing Machine.
Leaking
- Avoid packing your load too tightly; a hefty, imbalanced load can lead to an excessive water fill that may leak.
- If you see punctures, completely replace the hose. Replace only the internal washers if the hose is still in good condition.
- As the machine fills, unscrew the access panel and check for leaks inside the interior compartment. Replace the pump if leaks develop as the cycle continues.
- To relieve the tension on the belt, use a tool to loosen the two motor mounting bolts. Using a torque wrench, unfasten the mounting nuts for the pump and disconnect the pump’s hose.
- Set the mounting bolts in place, then tighten them. All hoses should be snapped back into place.The belt should be pulled taut, then the rear motor mounting bolt should be tightened.
If you are still facing the issue, it’s time to call a professional. Don’t forget to hire a certified professional who is expert in repairing Maytag washing machines.
Rather not repair your washer yourself?
Amar Appliance Repair fixes this exact problem across Surrey, Delta, Langley, White Rock, New Westminster and nearby Metro Vancouver cities — rated 4.9★ on Google (224 reviews, Sept 2026), open seven days a week. Tell us the model and the error code when you call and we arrive with the likely parts. Working on this brand? See our Maytag washer repair in Surrey page.
What it costs: the diagnostic visit is usually $100, depending on distance. If you go ahead with the repair, that $100 is part of your repair total — you don’t pay it twice. Repairs with new parts generally carry a 3-month warranty, depending on the work. Same-day visits are possible, depending on our schedule.