Why Won’t My Dryer Shut Off?
It can be confusing why appliances fail. For something as big and costly as a dryer, resolving this puzzle will save you money. Since replacing a variable is much cheaper than replacing a whole device. Whatever the model, there are many popular grounds for dryers to fail. Although it is sometimes hard to detect the problem yourself if you know little about dryers.
- Cycling thermostat:
Dryers with an “auto dry cycle” would be fitted with an adjustable cyclic thermostat inside the dryer. In other words, the heat energy is adjusted by the thermostat to obtain the required temperature. During a process, the thermostat is checked for the power of the timer motor by a multimeter. Beware, since this is a live voltage test it must be used.
- Cooldown thermostat:
Some dryers use a cool-down thermostat at the end of a cycle to tumble clothing heat-free. After the drum drops to a certain temperature, the dryer ceases working. If the cool-down thermostat doesn’t work correctly, then the tambour will run continuously or open the door. The thermostat is operated by the power to keep the drive motor running so that a multimeter can test the thermostat for continuity.
- Timer:
A defective timer engine or circuits may also prevent a dryer. If the motor of the dryer, heat circuit, or timer motor are not working correctly, it is not possible to shut down the dryer at the correct time, which results in it running beyond the required time. To detect any issues, connections can be tested through a multimeter. It should be repaired if the timer is faulty. Just unplugging the dryer must be carried out this test.
- Door Switch:
In dryers, the door switch is a security measure that protects a drum from turning while the door is open. The door switch may be defective if the dryer continues to spin. Typically, the switch is located just behind the panel and sticks into the frame. By first turning off and connecting your computer, you can test the features of the switch. The continuity of the switch can be checked by a multimeter via its connectors. Between the terminals “No” and “C,” when the door is open and when the button is not pushed, an infinite number of Ohms from the multimeter must be mounted. If not, you probably need a replacement component of a reputable appliance company.